Output Transformers for Fender® - NSC022921-T

Output Transformers for Fender® - NSC022921-T

Output Transformer

Output Transformers for Fender® - NSC022921

Output Transformers for Fender® - NSC022921

Reverb driver transformer. For all amps with reverb. 3.5 Watts - 4 ohms. Output Transformer

Output Transformers for Fender® - NSC041318-T

Output Transformers for Fender® - NSC041318-T

Output Transformer

Mercury Magnetics Marshall Choke JTM45 - 5H - 150mA - Mercury Magnetics CJT45W-5H

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.

Mercury Magnetics B-52 Choke 3H - 150mA - Mercury Magnetics B-52-C

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.

Mercury Magnetics Carvin Choke Legacy - Mercury Magnetics CRV-LEGA-C

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.

Mercury Magnetics Carvin Choke V3 - Mercury Magnetics CARV-V3-C

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.

Mercury Magnetics Carvin Choke X100B - Mercury Magnetics CRV-X100B-C

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.

Mercury Magnetics Ceriatone Choke DC30 - Mercury Magnetics CER-DC30-C

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.

Mercury Magnetics Ceriatone Choke OTS50 - 5 Henry - Mercury Magnetics CER-OTS50-C

Transformer sets are often misunderstood, yet vital musical components. They're integral to the nuances of your guitar amp's sound. Far more than tubes, speakers or other amp components, the transformers establish the platform for shaping your amp's unique sound.

As amp designers, techs and manufacturers are discovering, the practice of dumping generic, low-bidder transformers into their amps isn't cutting it any more. Today's players are more informed and demanding than ever. They hear the differences and know that both transformer design and build-quality will have a dramatic affect on their tone. In fact, if your amp is suffering from bland and unexciting tone then it's probably related to low-end or poorly designed transformers.

Who is Mercury Magnetics?

• 100% American made -- no tricks or hidden imports -- they really do make them from scratch, in California!
• 100% handmade and hand-tuned using only handwound components -- each and every transformer is consistent. If you ever need to replace one of our transformers your amp won't lose its tone -- your replacement will sound exactly the same as the original.
• American-made steel – they are the only transformer manufacturer who special orders the unique steel alloys used in our transformers. These alloys are not only made here in the USA to government specifications, and are not available anywhere else in the world. They're the same alloys used in the all-time best-sounding transformers during the ''sweet spot'' era (pre-1965) of guitar amplification history.
• Mercury maintains active and ongoing R&D (research & development). All kinds of new and exciting-sounding transformer designs (Axiom® series), as well as our ongoing cloning of outstanding transformers mined from the great old amps (ToneClone® series). For vintage British amp freaks, check out our Radiospares® and Partridge® series. And many modern amps can be upgraded with APS® series -- our newest line of guitar amp-specific transformers.
• Mercury transformers are found in the amps of virtually every major player in the world. Many specify Mercury and won't play an amp without them.
• Mercury transformers are standard components or factory upgrades available in virtually all high-end boutique amps, including Fender’s boutique and custom shop lines.
• Mercury transformers are so highly rated that they typically increase the value of any amplifier they're installed in.
• Did you know that guitar amp transformers are unusual in their design (when compared to other audio transformers). Ironically, almost all of the really great-sounding examples contain flaws, or ''design'' accidents, in their construction. They have intentionally reverse engineered the best transformers to ''clone'' their methods and materials (whether accidental or intentional). Technically, it is not possible to engineer the perfect guitar amplifier transformer using strictly ''by the book specifications.

CAUTION! The voltages in your amplifier can be dangerous. Transformers and chokes are not user serviceable parts. Installation of these components should always be performed by an experienced technician. The simple ability to use a soldering iron is not enough to qualify a ''do it yourself person.'' Those who are inexperienced in working with electronic circuits should never attempt to service their amplifier. Household line currents can be deadly!! Transformers, chokes and large filter capacitors can store a dangerous charge for several days or more after the amplifier has been unplugged. Never touch the terminals of such devices without being certain of their charge status. Risk of shock and damage to equipment may result from mishandling and/or improper use of these components. Please use common sense and always think safety first. After all, tone is most enjoyed when you are alive to hear it.