Seymour Duncan P-Rails Series - SHPR-1n - P-RailsTM, neck (black,white,cream) - 11303-01

P-RAILS SERIES - SHPR-1n - P-RailsTM, neck (black,white,cream)

Application
Ground breaking, patent pending design allows a full-size humbucker to split to either a ’real deal’ P-90 or a traditional single coil. Perfect for a wide variety of styles including country, pop, surf, jazz, blues, classic rock, and heavy rock.

Description
Until now, if you wanted humbucker, P-90, and vintage Strat® tones, you���d have to haul three

Guitars
to the gig. Enter P-Rails�ۢ. It’ a full-size humbucker that splits to either a full-size P-90 or a special Alnico-powered single-coil Rail pickup. The humbucker sound is full and expansive, owing to the mis-matched coil configuration. The P-90 is a super fat. And the Rail coils, when used together, sound like the ’2’ and ’4’ positions in a great Strat.

Complete setup
P-Rails are best used in a matched neck and bridge set. To get both humbucker and P-90 tones, use a two-way switch (push-pull or mini-toggle). To have humbucker and P-90 tones and bring in the added dimension of the single-coil Rail, use a three-way switch (DPDT on-off-on).

Guitars
P-Rails can be used in any guitar set up for a traditional humbucker or Trembucker. A single P-Rails will bring added dimension to your guitar. However, to optimize P-Rails��� unique splitting capabilities and get the best single-coil Rails tones, use a neck and bridge set.

Available mods
Normally, in humbucking mode, P-Rails are wired in series, for a high-output sound that works great for classic rock and heavier tones. However, when wired in parallel, the coil mismatch produces a very usable P.A.F.-style humbucker tone with less phase cancellation associated with standard parallel wired humbuckers, complete with present upper-mid ’bloom’ and pronounced string articulation.

Players
Peter Stroud / Sheryl Crow Band, Blues Saraceno, Eric Miker / Decemberadio

Seymour Duncan P-Rails Series - SHPR-1b - P-Rails, bridge (black,white,cream) - 11303-02

P-RAILS SERIES - SHPR-1b - P-Rails, bridge (black,white,cream)

Application
Ground breaking, patent pending design allows a full-size humbucker to split to either a ’real deal’ P-90 or a traditional single coil. Perfect for a wide variety of styles including country, pop, surf, jazz, blues, classic rock, and heavy rock.

Description
Until now, if you wanted humbucker, P-90, and vintage Strat® tones, you���d have to haul three

Guitars
to the gig. Enter P-Rails�ۢ. It’ a full-size humbucker that splits to either a full-size P-90 or a special Alnico-powered single-coil Rail pickup. The humbucker sound is full and expansive, owing to the mis-matched coil configuration. The P-90 is a super fat. And the Rail coils, when used together, sound like the ’2’ and ’4’ positions in a great Strat.

Complete setup
P-Rails are best used in a matched neck and bridge set. To get both humbucker and P-90 tones, use a two-way switch (push-pull or mini-toggle). To have humbucker and P-90 tones and bring in the added dimension of the single-coil Rail, use a three-way switch (DPDT on-off-on).

Guitars
P-Rails can be used in any guitar set up for a traditional humbucker or Trembucker. A single P-Rails will bring added dimension to your guitar. However, to optimize P-Rails��� unique splitting capabilities and get the best single-coil Rails tones, use a neck and bridge set.

Available mods
Normally, in humbucking mode, P-Rails are wired in series, for a high-output sound that works great for classic rock and heavier tones. However, when wired in parallel, the coil mismatch produces a very usable P.A.F.-style humbucker tone with less phase cancellation associated with standard parallel wired humbuckers, complete with present upper-mid ’bloom’ and pronounced string articulation.

Players
Peter Stroud / Sheryl Crow Band, Blues Saraceno, Eric Miker / Decemberadio

Seymour Duncan P-Rails Series - SHPR-2b - P-Rails Hot (black,white,cream) - 11303-04

P-RAILS SERIES - SHPR-2b - P-Rails Hot (black,white,cream)

Guitar

Players
want it all and they want it now. Fat humbucker tones. Beefy P-90 tones. Traditional single coil tones. With P-Rails® they can have it all. And now, with the new P-Rails Hot, they can get a punchier, more aggressive tone for the bridge position.

Application
This Seymour Duncan-exclusive design is a direct humbucker retrofit that allows up to three distinct voices: full-size humbucker, P-90, and Rails. Recommended for all styles of music.

Description
Compared to Original P-Rails, the Hot bridge features a beefed up coil and a more powerful Alnico 8 magnet to deliver the same tonal flexibility as its predecessor, but specifically designed to provide a punchier, more aggressive tone in the bridge position. The P-90 coil in the P-Rails Hot is wound with a special wire type, selected for output and clarity. This P-90 is loud! The Rail mode is hotter thanks to the power of the Alnico 8, and the series Humbucker mode is huge!

Complete setup
A P-Rails Hot in the bridge and a P-Rails Original in the neck. To get both humbucker and P-90 tones, use a two-way switch (push-pull or mini-toggle). Use a three way switch (DPDT on-off-on) to bring in the single coil Rail tones.

Guitars
P-Rails Hot can be used in any guitar set up for a traditional humbucker or Trembucker. It can be used singly, however to maximize P-Rails' unique splitting capabilities and get the most tonal versatility, use a neck and bridge set. The R-Rails Hot is recommended for bridge position.

Available mods
Normally, in humbucking mode, P-Rails are wired in series for a high-output sound that works great for classic rock and heavier tones. However, when wired in parallel, the coil mismatch produces very usable moderate output humbucker tones with less of the phase cancellation often associated with standard parallel-wired humbuckers. Available in black, white or cream.

Seymour Duncan P-Rails Series - SHPR-1s - P-Rails, set (black,white,cream) - 11303-03

P-RAILS SERIES - SHPR-1s - P-Rails, set (black,white,cream)

Application
Ground breaking, patent pending design allows a full-size humbucker to split to either a ’real deal’ P-90 or a traditional single coil. Perfect for a wide variety of styles including country, pop, surf, jazz, blues, classic rock, and heavy rock.

Description
Until now, if you wanted humbucker, P-90, and vintage Strat® tones, you���d have to haul three

Guitars
to the gig. Enter P-Rails�ۢ. It’ a full-size humbucker that splits to either a full-size P-90 or a special Alnico-powered single-coil Rail pickup. The humbucker sound is full and expansive, owing to the mis-matched coil configuration. The P-90 is a super fat. And the Rail coils, when used together, sound like the ’2’ and ’4’ positions in a great Strat.

Complete setup
P-Rails are best used in a matched neck and bridge set. To get both humbucker and P-90 tones, use a two-way switch (push-pull or mini-toggle). To have humbucker and P-90 tones and bring in the added dimension of the single-coil Rail, use a three-way switch (DPDT on-off-on).

Guitars
P-Rails can be used in any guitar set up for a traditional humbucker or Trembucker. A single P-Rails will bring added dimension to your guitar. However, to optimize P-Rails��� unique splitting capabilities and get the best single-coil Rails tones, use a neck and bridge set.

Available mods
Normally, in humbucking mode, P-Rails are wired in series, for a high-output sound that works great for classic rock and heavier tones. However, when wired in parallel, the coil mismatch produces a very usable P.A.F.-style humbucker tone with less phase cancellation associated with standard parallel wired humbuckers, complete with present upper-mid ’bloom’ and pronounced string articulation.

Players
Peter Stroud / Sheryl Crow Band, Blues Saraceno, Eric Miker / Decemberadio